How to Help save Large Funds on Swimming Pool Chemicals by Putting in a Twin Key Drain Technique Your self
1) Following you have acquired your drain kit lay everything on the ground so you can see all the sections.
2) Take the two vortex drains and tape a gasket on prime of each one. Place the tape more than the screw holes to avert any grime from acquiring in them.
three) Glue the drain plug in the bottom of each and every vortex drain with the PVC glue.
four) Get the douleur fittings and glue just one in every facet of the vortex drains.
5) Take the sch. forty PVC and cut 2 parts at approx. 16 inches very long and glue one in each and every male fitting on the side of the vortex drain.
6) Choose the "T" fitting and glue one side to the sch. 40 PVC on one drain and the other facet to the other drain earning absolutely sure that the facet opening of the "T" is parallel to the ground. This opening is in which the flex hose will be inserted so you do not want it going through down or straight up.
7) Get the four-way valve and screw in the two hose adapters (just one on top rated and just one on the facet) then consider the douleur fitting and screw that on the bottom of the 4-way valve. Use Teflon tape on the threads because these may possibly have to be changed in the long term.
eight) Now, come across the center of your pool and mark it. Place the two drain assembly there with the "T" fitting on prime of the mark. Just take a can of spray paint and spray all around the drains so you know in which to dig and then set the drains aside until finally your performed digging the trench. Keep in mind to deal with the "T" opening in the path wherever you want or have your filter place.
nine) After you have the trenches for the drains and the flex hose performed location the drains in and glue the flex hose to the "T" opening. Just take the other finish of the flex hose and go under the wall channel straight below the skimmer. You ought to be at lease 12" past the wall channel. Minimize the flex hose and glue the 90 degree fitting on along with the sch. 40 PVC. Retain it minimal to the ground I generally keep it about 4" above quality. Go again and fill in the trench with sand or grime and compact it with a hand tamper.
10) Blend up an eighty lb bag of cement and cement the two drains in put making confident they are amount and also the sch. 40 elbow on the outdoors of the pool. You can now glue the four-way valve in put on the PVC under the skimmer. Just take the 3 ft hose and connect 1 conclusion to the best of the 4-way valve and the other to the bottom of the skimmer and then take a different hose from the side hose adapter to the pump.
Congratulations, you have just installed a twin main drain method.
REFERENCES:
http://www.articlemotron.com/Article/Uses-And-Benefits-Associated-With-An-Industrial-Hose/649648
http://www.articlescrib.com/Art/483379/191/Uses-And-Benefits-Of-An-Industrial-Hose.html